How to Install a TT Soft Top

Manual Soft Top Operation
1. Turn your Audi TTs engine off if your soft top is only manually installable.
2. Push in the soft top release storage buttons on either side of the vehicle. Pull the soft top up and release its front strap.
3. Lift the entire soft top out of the storage container and fit it over the vehicles cockpit until it connects to the windshield frame.
4. Go inside the Audi TT, press the large button on the ceiling and grab the soft top handle. Turn the handle counterclockwise and pull down on the soft top. Turn the handle clockwise while holding the soft top to the windshield frame.
Power Controlled Soft Top Operation
5. Turn your Audi TTs engine on and pull up on the emergency brake to engage it.
6. Push the soft top control button next to the emergency brake and hold it in. The soft top will emerge from the storage well in the rear of the vehicle.
7. Release the button when the soft top is no longer moving forward. Press the large button on the ceiling and twist the soft top handle counterclockwise. Pull the soft top down and toward the windshield frame and twist the handle clockwise to lock it in.

How do I Put Down the Convertible Top on a 1987 BMW 325i

1. Lower both the driver- and passenger-side windows. You may damage your windows or your soft top if you skip this step.
2. Unlatch both of the two locks above the rear-view mirror. This allows you to lift the top from the front of the car.
3. Unlatch the storage compartment for the soft top using the handle on the left rear of the cars interior. Open the storage compartment cover by using the safety catch.
4. Raise the cover from the front of the car and pull it backward. Place it in the storage compartment using neat folds. Pay careful attention not to scratch or break the rear window, because it folds with the rest of the top into the rear compartment. The entire window and soft top are one piece.